Husqvarna 5710 machine Г  coudre mode d’emploi

Husqvarna 5710 machine Г  coudre mode d’emploi

I’m Happy to husqvarna 5710 machine Г  coudre mode d’emploi my knowledge with anyone who ask a question about their broken sewing machines. I will try my best to solve your machine or ovelocker problems. I can help you with Brother, Janome, Elna, Pfaff, Husqvanrna, Bernina Sewing machines and overlockers or Sergers. You can also find Sewing machine or Serger user manuals and service manuals.

Husqvarna Viking Service Manual, models 0210 to 6460 This comprhensive technical service manual has been written to meet the ever increasing requests for knowledge by Viking technicians. The feeder dog moves up and down but does not move back and forth to move the cloth. Take the back off and wd40 the reverse section move it back and forth to free it. Do not use WD40 on it. To free it up use BP Blaster, then use Marvel Mystery oil you can find it at Walmart or any Auto parts store.

Marvel Mystery oil will not leave a varnish and stick gears and cams. Make sure your feeder are up. It could be that your machines stitch regulator is sticking and needs a clean. You will have to remove the back cover for that and heat the sticking parts with a hair dryer to melt the old oil. Maybe there is some dirt stuck under your needles plate. Hi, I have a Viking 6570.

It seemds to have some kind of elec problem. My 1st one I have used since the 80’s. The machine light comes on when plugged in. I have kept it clean but have used it alot. Repair people have not been able to fix it. I then got one off of ebay and it has been fine.

I had it tuned up when I got it. I tried the newer foot on older and it still wouldn’t work,just light does. Have a look at your motor brushes. They take a long time to wear out normally. Could be that you need to change your foot control. Normally if you turn your hand wheel and your machine starts again: Brushes or damaged motor. If you have a basic Multi Meter you can test to see if you get a reading from your foot control and pressed down.


Comments are closed.