Other Model Numbers Referenced to The Same Manual. Other Items that are in the Same Category. Kenwood KDC-148 Instruction Manual Cd receiver. This equipment may generate or use radio frequency energy. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Take the time to read through this instruction manual. Register your Kenwood product at www. 2010 Kenwood Corporation All Rights Reserved.
Page 2: Table Of Contents If you experience problems during installation, consult your Kenwood dealer. When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area. The Faceplate, Reset, Preparation Keep battery out of reach of children and in original package until ready to use. Page 4: Basic Operations Basic operations Remote sensor Do not expose to bright sunlight.
IN: A disc is in the unit. Maintenance Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. SCRL DISP — — — EXIT Muting upon the reception of a phone call To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. Page 6: Canceling Display Demonstration, Setting Demonstration Mode, Adjusting Clock, Initial Settings Before Operations Getting started Canceling the display demonstration The display demonstration is always turned on unless you cancel it. Adjust mode settings While listening to the radio 1 Press the volume knob to enter mode.
Page 8: Listening To A Disc Listening to a disc Press to select next folder. 1 Press SRC to turn on the power. 2 Insert a disc into the loading slot. Not available if Random Play or Scan Play is selected.
1 Press DIRECT to enter Direct Music Search Mode. 2 Press the number buttons to enter the track number. Page 10: Function Settings Function settings 1 Press the volume knob to enter mode. 2 Turn the volume knob to select or , then press to enter.