Samsung afstandsbediening 00286a handleiding

Samsung afstandsbediening 00286a handleiding

Select the method that is appropriate for samsung afstandsbediening 00286a handleiding remote. Note: Most remotes use Method 1. Turn your cable box, DVD player, TV, or VCR off. Press the Mode button on your remote to switch the remote to cable box, DVD, TV, or VCR mode.

Note: Instead of a Mode button, your remote may have a row of component buttons at the top labeled TV, DVD, VCR, etc. If that is the case, press the button of the device you want to program. Press the Set button on the remote control. Enter the three digit DVD player, cable box, TV, or VCR code listed in your TV’s user manual. If the code is only one or two digits, you must make it into a three digit code by adding zeros before the number.

For example, if the code is 9 enter 009. Note: If you don’t have your user’s manual handy, click HERE to access your manual online for the necessary codes. Important: If the manufacturer of your device is not listed in the Code List in your user’s manual, your Samsung remote cannot operate that device. Press the Power button on the remote control. The cable box, DVD player, or VCR should turn on. Samsung cannot guarantee that our universal remote controls will operate all products for the manufacturers listed, especially older models. Try the codes listed in the TV owner’s manual for your brand of cable box, DVD player or VCR first.

If those codes do not work, try all cable box or VCR codes listed. Turn on the device you want to control. Aim the remote control at the device. Press the Set button once with a sharp object such as a pen or open paper clip.

Enter the three digit code for the device that is listed in your user’s manual. If you enter the code correctly, the device turns off. Press the appropriated device button again. The button should blink twice, and then turn off. Try the codes listed in the TV owner’s manual for your brand of cable box, DVD player, TV, or VCR first. If those codes do not work, try all cable box, DVD player, TV, or VCR codes listed. Note: Although the programming procedure may vary slightly by model, the procedures presented here are the standard procedures for programming Samsung remote controls.


Comments are closed.