Sharp mx 2314n manual

Sharp mx 2314n manual

We sell electronic versions of service and user manuals, part lists, schematic diagrams for home and professional audio-visual equipment, PCs and other electrical appliances. 000 documents in sharp mx 2314n manual growing collection!

Sharp MX-2314N Manuals Manuals and User Guides for Sharp MX-2314N. Sharp MX-2314N Installation Manual Digital full color multifunctional system. The contents are subject to change without notice. If power waveform is deformed, a trouble may occur. Note for handling PWB and electronic parts Humidity RH When handling the PWB and the electronic parts, be sure to observe the following precautions in order to prevent against dam- age by static electricity.

When in transit or storing, put the parts in an anti-static bag or an anti-static case and do not touch them with bare hands. Page 4: Transit And Delivery Remove the packing materials prior to installation in the office envi- ronment. Page 5 Attach the removed fixing material to the position shown in the figure for future use. Close the tray which was pulled out. Remove the optical unit fixing screw, and remove the note label.

Page 6 Be sure to shake the bag of developer thoroughly before pour- ing into the developing unit. When pouring the developer into the unit, use care to not get developer in to the drive section. Page 7 When removing or installing the developing unit, put your hand from below the unit and slide it in parallel along the guide. At that time, be careful not to touch the roller surface. Page 8 After the machine completes cycling, exit the simulation mode. Shake the toner cartridge horizontally several times. Page 10 Close the front cabinet.

The guide plates A and B are slidable. Slide each guide plate while squeezing its lock lever. This adjustment performs the print engine image distortion adjust- ment, the OPC drum phase adjustment, and the color registration adjustment simultaneously. ALL_ROTATES” shows the number of rotations of adjust- ments for all the adjustment screws. Page 13 In this case, check each drive section and the process section. The densities of patches 1 – 6 of Patch 7 is slightly each color are properly balanced. The background density is not so light.


Comments are closed.